Hosted by Laverda spare Parts
For a super-light clutch pull on a Laverda and extended cable life.
Fits all Breganze Laverda 750cc, 1000cc and 1200cc that use a cable clutch with a round inspection hole in the cover.
Manufactured to a design by Greg Parish specifically for the DA.M. racing bikes and to suit standard road bikes. The D.A.M. Laverda Easy Clutch replaces your old clutch actuating lever without the need to cut your precious engine covers.
Precision Laser Cut from 316 Stainless Steel the lever is an easy replacement without any modification or special tools required.
NB: NOT RECOMMENDED FOR USE WITH AFTERMARKET KEVLAR PLATES. These plates are thicker than Laverda specify and cause problems with the actuating lever binding on the cases. You may also find that the handlebar lever will not pull all the way into the bar, even before fitting the D.A.M. Easy Clutch.
The original design DAM Easy Clutch
installed on the DAM Racing Laverda 3C
MK2 design with a bottle opener
Easy Clutch Actuator, Clutch Cables and parts
Laverda Parts
SPECIAL FOR LAVERDA
Installation Instructions
<<< BACK to Spare Parts
Clevis for Clutch Cable - Stainless
Laverda all models with cable clutch
Notes: 4mm Clevis-Pin and R-Clip sold separately.
Best option for use with DAM Easy Clutch.
Weight: 9g
Gasket
Sprocket Cover
55 120 001
Shipping size 230mm x 160mm
Weight: 10g
DAM Easy Clutch STD - Stainless
Laverda all models with cable clutch
Notes: Recommend to fit new cable, gaskets and clevis
Shipping size: 160mm x 60mm
Weight: 129g
DAM Easy Clutch BO - Stainless
With bottle opener hook.
Laverda all models with cable clutch
Notes: Recommend to fit new cable, gaskets and clevis
Shipping size: 160mm x 60mm
Weight: 129g
no picture
Copyright The DAM
The MK3 design DAM Easy Clutch
Low profile with 2 positions for cable attachment
MK-SFC Straight with 3 position cable attachment and MK3 DAM Easy Clutch with two position cable attachment.
DAM Easy Clutch MK3 - Stainless
Laverda all models with cable clutch
10%GST will be removed for International sales
Notes: Kit includes bolt, riser and grommet not pictured. Recommend to fit new cable, gaskets and clevis.
Shipping size: 160mm x 60mm
Weight: 129g
DAM Easy Clutch MK-SFC - Stainless
Laverda all models with cable clutch
Notes: Kit includes bolt, riser and grommet not pictured. Recommend to fit new cable, gaskets and clevis.
Shipping size: 160mm x 60mm
Weight: 129g
Media and Articles
